Synco Mic-D1 Hyper-Cardioid Professional Shotgun Microphone
The SYNCO Mic-D1 Hyper-Cardioid Professional Shotgun Microphone is a hyper-cardioid, professional shotgun microphone that delivers broadcast-quality sound in the studio or on location. The microphone features 78dB SNR, CNC Brass Metal Construction, 48V Phantom Power/ AA Battery, and Gold Plated XLR Connector. There is a selectable high-pass filter at 180 Hz that minimizes unwanted noise and rumble. Ideal for outdoor recording!
SYNCO Mic-D1 Shotgun Microphone Overview
Broadcast Sound Quality SYNCO Mic-D1 professional shotgun microphone is designed for video production and broadcast applications. 78dB Signal-to-Noise Ratio (SNR) guarantees better audio signal transmission. A premium foam windscreen attached will help reduce environmental noise largely. This microphone will present original sound perfectly, ideal for outdoor recording. Hyper-cardioid Microphone As a Hyper-cardioid shotgun microphone, Mic-D1 with high-grade condenser transducer would focus on picking up rich detailed sound right in front of it and reject sounds coming from side and rear. The elevated sensitivity of -32dB(±2dB) allows it to produce strong output levels without having to apply extreme gain at your mic preamp. CNC Brass Metal Construction Made of instrument-grade brass, SYNCO Mic-D1 has an elegant appearance and solid construction under CNC processing. Brass material would not damp acoustic vibration, and can deliver a bright and clear sound tone; it also endows Mic-D1 with strong anti-interference capacity. Matte finish rejects unwanted light reflections. 48V Phantom Power/ AA Battery Having a gold-plated 3-pin Male XLR connector, Mic-D1 runs on 48V phantom power supplied by most professional video cameras, mixing boards, or recording devices. It can also be powered by one AA battery over 100 hours, which is ideal for DSLR cameras, computers, and other devices that don’t offer phantom power. Selectable 180Hz High-pass Filter Designed with a high-pass filter button, SYNCO Mic-D1 could remove undesired low-frequency noise and rumble at 180Hz, such as footsteps, or motor noises from record players, air conditioners, blowers, etc. Using advanced sound wave interference technology, the Mic-D1 tube would filter out some frequency noise too. Multiple Mounting Position The length (11.22 inches) of shotgun Mic-D1 is well suited for ENG, outdoor recording, and camera mounting. A 3/8” to 5/8” mic holder for easy placement on a boom pole or tripod. Through XLRM-XLRF cable and 3.5mm-XLR cable, the Mic-D1 can connect to cameras, camcorders and mixer boards, etc. Crisp Natural Sound SYNCO Mic-D1 is designed for Film, Broadcast & Video Production, superior than most similar products on the market. It will deliver a crisp and clear natural sound smoothly. A SNR of 78dB ensures quality sound picking up effect. Hyper Cardioid Polar Pattern Hypercardioid Microphone is highly sensitive (-32dB Sensitivity) to the sound source in front of it, while reducing sound from other directions. A good choice no matter in a professional recording studio or a noisy environments such as a convention floor or sporting event. Brass Construction Adopting all-brass tube, the Mic-D1 has a strong anti-interference ability, which can efficiently shield disturb of electromagnetic signals and enable equipment to work normally. Brass material delivers a bright and clear sound tone. Battery or Phantom Power SYNCO Mic-D1 supports two power supply ways, including 48V Phantom Power from professional V-mount charger, camcorder or other recording devices; and one detachable AA battery. Convenient for different devices recording. Gold Plated XLR Connector A gold plated 3-pin Male XLR connector resists corrosion and guarantees excellent signal transfer. With this connector, Mic-D1 can connect to most professional recording devices for quality audio picking up. Mic Holder A Mic holder with 3/8″ to 5/8″ connector increases the installation methods largely, can easily insert or remove the microphone. It also has non-slip dents that hold the microphone well. Foam Windscreen A premium foam windscreen is attached to improve the audio quality and eliminate the background noise, such as wind and vehicles. It’s helpful to keep your microphone sanitary by avoiding dust, moisture and spit.
SYNCO Mic-D1 Shotgun Microphone Specifications
Element | Back Electret Condenser |
Polar Pattern | Hyper-Cardioid |
Frequency Response | 40Hz – 20,000Hz |
Signal to Noise Ratio | 78dB(1KHz at 1Pa) |
Sensitivity | -34dB/-32dB±2dB(1dB=1V/Pa at 1kHz) |
Max.Input SPL | 130dB |
Dynamic Range | 106dB/91dB 11kHZ at MAX SPL |
Output Impedance | 500Ω/600Ω(48V/1.5V) |
Power Requirements | Phantom Power 48V/1.5V AA Battery |
Battery Runtime | 100 hours |
Output Impedance | 500Ω/600Ω(48V/1.5V) |
Output Connector | XLR 3-Pin Male |
Low-Frequency Roll-off | High-pass Filter |
Material | Brass |
Dimensions (L x Diam) | 11.22 x 0.83 inches |
Weight | 7.3 oz/207g |
SYNCO Mic-D1 Shotgun Microphone Package List
SYNCO Mic-D1 Microphone*1 XLRM-XLRF Cable*1 XLRF-3.5MM Cable*1 Mic Holder*1 Foam Windscreen*1 Protection Box*1 User Manual*1
Reviews
There are no reviews yet.